Sensors of physical parameters -  Information portal  2016 - 2017                                                                                                            Use of material is possible by placing an active link
Thermoelectric converters Chromel Copel. Thermocouple TCC
(Russia. Thermocouples are commercially available. Typ. specifications. Appointment Wednesday, object measurement, etc.)

TCC-0188
-40 .. 600 C, without fittings, length 320 mm ... 20000
Air, non-corrosive gases.

TCC-0583
0 ... 200 C fixture - 12X18H10T or 36-, length 60 ... 320 mm
Production of sausages and other food products.

TCC-1072
0 ... 400 C fixture - 081810, 12X18H10T, length 630 mm 10 600 ...
High purity water. Designated purpose.

TCC-1087
0 ... 600 C fixture - 121810, 1017132, length 200 ... 2000 mm, explosion proof execution.
A mixture of gases, ammonia, converter gas turbine oils, and the like.

TCC-1090
-50 ... 400 C fixture - 12X18H10T, Insertion Length 10 ... 1250 mm, safety grade - 2H.
NPP. Water, smear, steam, air, metal, bearings. Nuclear power plants, areas of severe regime.

TCC-1172R
0 ... 500 C fixture - 121810, 1017132, length 80 ... 400 mm
Marine applications. Exhaust gases.

TCC-1172
0 ... 500 C fixture - 12X18H10T, length 80 ... 320 mm
Water, gas, air, exhaust gases. Designated purpose.

TCC-1190
-50 ... 400 C fixture - 12X18H10T; Insertion length 32 ... 200 mm, safety grade 2H.
NPP. Water, oil, steam, air, metal, bearings. Nuclear power plants. Areas of severe regime.

TCC-1590
-50 ... 400 C fixture - 081810 (121810) Insertion Length 120 ... 20000 mm, safety grade 2H.
NPP. Nuclear power plants. Coolants, "dry" and "wet" reactor channels.

TCC-1690
-50 ... 400 C fixture - 081810 (121810) Insertion Length 120 ... 20000 mm, safety grade 2H.
NPP. Nuclear power plants. Areas of severe regime.

TCC-2088
-40 ... 600 C fixture - 08H13, 12X18H10T, length 320 ... 2000 mm
Wide application, the surface of solids.

TCC-2388
-40 ... 600 C fittings - steel, length
  200 ... 3100 mm
Wide application.

TCC-2488
-40 ... 400 C fixture - 12X18H10T, length
  10 ... 320 mm
Processing thermoplastics using worm presses.

TCC-2588
-40 ... 600 C fixture - 12X18H10T, length
  120 ... 800 mm
Processing thermoplastics using worm presses.

TCC-2688
-40 ... 200 C fixture - 12X18H9T, length 6 mm
Mixing chamber rubber semis

TCC-2788
-40 ... 200 C fixture - 12X18H10T, length 60 ... 100 mm
Production of sausages and other food products.

TCC-2888
-40 ... 200 C fittings - Steel 40X, length 130 mm
Mixing chamber rubber semis.

TCC-2988M
-40 ... 550 C, without reinforcement, the number of zones 3 .. 10 and a maximum length of 7400 mm zone
Reactors for catalytic hydrotreating reformnga and petroleum products.

TCC-3088
0 ... 300 C fittings - copper, length 45 mm
Head spinning machine and iron.
SENSORS OF PHYSICAL PARAMETERS
The materials for thermoelectrode has the following requirements:
high thermo-EMF is proportional and close to the character of its changes on temperature;
heat resistance (neoteleostei at high temperatures);
immutability of the physical properties over time in the pre Affairs of measured temperatures;
high electrical conductivity;
small temperature coefficient of resistance;
the possibility of production in large quantities with the same physical properties.

Chromel-thermocouple kopeleva. These thermocouples allow to measure long-term temperature up to 600C and briefly up to 800 C. They successfully work both oxidising and reducing atmosphere and in vacuum.